
ROTEL RA-11
With a full complement of digital and analogue input connections, the RA-11 provides a solid 40 Watts per channel output in a slimline chassis, providing a great solution for small systems.
The RA-11 carries a similar set of features to the RA-12 but is slightly less powerful at 40 Watts per channel and is constructed in a slimline enclosure. Just like the RA-12, every critical signal chain component is selected to ensure that music from the RA-11 is delivered with as much detail, dynamics, clarity and emotion as possible. The RA-11 incorporates the same high-end Wolfson WM8740 24-bit/192kHz DAC chip as the RA-12 and the same complement of five conventional analogue inputs, four S/PDIF digital inputs, and an Apple authorised USB input. The RA-11 can be controlled through either its front panel buttons, via a remote handset, or paired with an RT-12 and the Rotel Remote app for iPhone and iPad.
CONTINUOUS POWER OUTPUT | 40W/Ch (All channels driven, 8Ω) |
POWER REQUIREMENTS | 230V, 50Hz |
POWER CONSUMPTION | 220W |
STANDBY POWER CONSUMPTION | <0.5W |
TOTAL HARMONIC DISTORTION (THD) | (20Hz–20kHz) <0.03% |
FREQUENCY RESPONSE |
Line Level Inputs: 10Hz - 100kHz ±1dB
Digital Inputs: 10Hz - 95kHz ±3dB
Phono Input: 20Hz - 15kHz ±0.3dB
|
S/N RATIO (IHF "A" Weighted) |
Line Level Inputs: 100dB
Digital Inputs: 100dB
Phono Input: 80dB
|
DAMPING FACTOR | 180 |
SPEAKER IMPEDANCE | 4Ω minimum |
INPUT SENSITIVITY |
Line Level Inputs: 150mV
Phono Input (MM): 2.5mV
|
INPUT IMPEDANCE |
Line Level Inputs: 24kΩ
Digital Inputs: 75Ω
Phono Input (MM): 47kΩ
|
INPUT OVERLOAD |
Line Level Inputs: 5V
Phono Input: 180mV
|
OUTPUT IMPEDANCE | 470Ω |
TONE CONTROLS | ±10dB at 100Hz / 10kHz |
PREOUT LEVEL | 1V |
COAX/OPTICAL DIGITAL INPUT SIGNALS | LPCM (Up to 24-bit/192kHz) |
DECODABLE FRONT USB FORMATS | MP3, WAV, WMA, Ogg Vorbis (up to 48kHz 16-bit) |
DIMENSIONS (W × H × D) | 430 × 72 × 342mm |
NET WEIGHT | 6.39kg |